X21科幻超级3D

X21

科幻超级3D

《产品使用指南》

行车更安全，就装博视宝

目录

01安装指导

1.1安装前准备····························································································································01

1.2安装步骤   ····························································································································01

02拼接指导

2.1第一步：铺好两块大布·······································································································03

2.2第二步：进入菜单选择标定·······························································································04

   标定失败原因 ······················································································································06

03主机定义

3.1产品全家福····························································································································08

3.2主机接口定义························································································································08

3.3主机指示灯说明····················································································································11

04接线指南

4.1线束定义·································································································································12

4.2接线指南·································································································································14

4.2.1 轨迹盒接线示意图····································································································14

4.2.2 AHD安卓大屏接线示意···························································································14

4.2.3 加装解码器接线示意图····························································································15

05功能介绍

5.1 360全景画面·························································································································16

5.2设置菜单画面·························································································································20

06参数说明

6.1产品参数说明·························································································································24

07旋钮遥控器使用

7.1旋钮设置与激活·····················································································································25

7.2 旋钮遥控器使用····················································································································26

· 01安装指导                     

1.1 安装前准备工具：

（拆车工具，车内保护工具、全景摄像头配件）

1.2 安装步骤：

1.拆卸中控台

2.摄像头安装

左右摄像头安装：拆卸左右门板，确定左右摄像头安装位置，拆卸镜片，钻孔，安装摄像头（专用外壳无需打孔），穿线，后视镜复位，万能表找到转向灯正极，连接触发线，左右门板布延长线，还原门板和镜片：

后摄像头安装：打开后备箱，拆卸装饰板，取出牌照灯，安装后视摄像头，连接触发线和倒车灯线正极，连接后视延长线，布线：

前视摄像头安装：打开引擎盖，安装前摄像头，连接延长线，布线，避开高温区域：

3.安装主机到副驾驶的手套箱内，把主机上相应接口的线束连接好。安装基本完成，等待后期拼接。安装环境应选择宽敞明亮之处，避免强光下操作，反光的话会影响拼接效果。

友情提示：

1、摄像头安装：

360全景产品需要安装前后左右四个摄像头,前摄像头一般安装在汽车中网处,尽量居中;后摄像头头安装于后车门把手处附近; 左、右摄像头分别安装于左、右后视镜底部。

2、主机安装：

360全景主机安装在副驾驶手套箱内，这样便于后期查看录像和系统维护升级。

· 02拼接指导                   

2.1 第一步：铺好两块大布：

前、左、右标定布已经缝在一起，只需要铺正即可，注意尾部左右布和后布交接位置的距离指示线，有0.8米、1米、1.2米、1.4米、1.6米、1.8米等，需要根据车身长度来决定后布铺在哪条指示线上

友情提示：

如上图所示，几个要点需要注意

1、针对前后，摄像头看到的图像与车身之间无空隙，且不挡住上面的黑白棋盘格交叉点；

2、针对左右，摄像头应看到部分车身，注意车身不能看太多，也不能看太少，如果车身看太多了，外面视野会太少，影响3D效果。如果车身看太少了，过窄道和限宽模式看不到车身。同时，上图中A、B两点应尽可能相同，即车头车尾看的差不多，尽量避免某头翘起来；

3、左右两侧标定布与车身间距尽量相同。

2.2 第二步：进入菜单选择标定

进入360全景设置菜单，【系统设置】，【进入标定】，

根据后布与左右交接位置的实际位置，选择对应的距离，进入标定根据第一步设定的长度进行自动标定

进入【开始标定】，按下旋钮，进入四合一画面，选择开始标定，系统将自动标定，无需人工干预。

前期铺布时也需进入此画面，用于调节布位置和摄像头角度。

约10~20秒左右后，界面将提示标定成功或标定失败，若标定成功，

则会3秒后自动重启，若失败，则提示哪个摄像头标定失败，

需要将失败原因排除后重新标定。

标定失败原因：

铺布或摄像头安装不佳，外部环境过暗

布的位置过于远，导致布与车身之间存在明显间隙▲▲▲

镜头角度安装位置过近，导致遮住了棋盘格黑白交叉点▲▲▲

标定失败原因：

左右镜头角度不对，导致画面中布是歪的▲▲▲

外部环境太暗，导致系统无法识别黑白棋盘格▲▲▲

· 03外观说明                     

3.1产品全家福：

3.2 主机接口定义：

产品引脚功能定义

表 1   JP5 引脚定义说明

说明：

①此处的串口 1 和 JP6 的 Pin4，Pin6 的串口 1 是同一个串口。

②此处的串口 2 和 JP4 的 Pin17，Pin19 的串口 2 是同一个串口，此处默认不使用；

串口 2 默认使用 JP4 的 Pin17 和 Pin19，若要使用此接口请联系我司销售人员。

表 2   JP4 引脚定义说明

表 3   JP6 引脚定义说明

说明：

① 默认为 12V 输出，若要使用 5V 请联系我司销售人员。

3.3 主机指示灯说明如下表：

表 4   指示灯说明说明

· 04接线指南                     

4.1线束定义：

4.1.1 电源总线T5-1

4.1.2 全景摄像头主线T5-2

4.1.3 视频串口线T5-3

4.1.4   VGA线束T5-4(选配)

4.2 接线指南：

4.2.1.轨迹盒接线示意图

4.2.2   AHD安卓大屏接线示意

4.2.3 加装解码器接线示意图

· 05功能介绍                   

5.1 360全景画面：

5.1.1 3D环视

5.1.2.前视流媒体

5.1.3 前视画面

5.1.4 后视流媒体

5.1.5 后视影像

5.1.6 上帝鸟瞰视图

5.1.7 车前窄道模式

5.1.8 车身窄道模式

5.1.9 左视画面

5.1.10 右视画面

5.2 设置菜单画面：

5.2.1 个性化设置

5.2.2 行车记录

5.2.3 系统设置

5.2.4 版本信息

· 06参数说明                     

6.1 产品参数说明：

· 07旋钮遥控器使用               

7.1 旋钮设置与激活

主机通电后，全景画面不显示，按旋钮也没反应，此时需要对旋钮进行激活：

【在操作前请确保主机已通电】

激活操作步骤如下：

Step1：底部推出后盖，取出电池（如下图所示）

Step2：按住按钮， 装上电池，等待3s后再松开，激活成功（如下图所示）

Step3：推上后盖，即可使用（如下图所示）

7.2 旋钮遥控器使用：

短按:OK/返回（全景显示界面）

长按:返回（菜单设置界面）

左旋:向左选择

右旋:向右选择